SADELEC-PCB is a commercial company based in Pașcani, specialized in the design and manufacture of printed circuit boards for the most different areas of use.
We are part of a French group with more than 20 years of experience, whose factory is located in south of China and has a daily processing capacity of more than 300 square meters of laminate.
Our production space
Our factory is located in the south of China near the city of Guang Zhou and operates on an area of 14500 square meters.
500 employees, including 460 workers, working in three shifts.
2 manufacturing lines, one of which is reserved only for samples and small series with a fast delivery time.
The factory has ISO 9001 certification as well as UL approval.
Execution terms:
Deliveries anywhere in Romania and Europe
Environmental protection is an integral part of our industrial policy. The factory has all the necessary equipment for treating waste water, filtering and removing noxes, industrial gases and microparticles from the atmosphere.
current (AC) characteristic that increases with frequency and becomes critical for printed circuits operating at frequencies above 200 or 300 Mhz. Impedance calculator software is PCB SADELEC a good starting point to determine the track width (w) and insulation thickness (h) of a given impedance. In terms of
but can have different colors: green, red, blue, white, black. Only the outer layers need to be covered with solder mask, the inner copper layers are protected by the adjacent substrate layers. The SADELEC PCB soldering mask soldermask is made of a fluid substance like an ink and is applied in a thin layer similar to varnish
board has many more routing options in the internal layers compared to the two-layer board, and often part of the internal layers are used as a ground plane or power plane, to achieve better signal integrity, higher signaling frequencies, and better power supply decoupling. In multilayer boards, SADELEC PCB layers of material