On request, we can assembly your pcbs with the components purchased by us or by you.
We need the BOM file and the specific requirements of the printed circuit board if there are any.
Planting can be done manually or automatically with the Robot.
For the SMD components, automatic planting will also require the creation of a Stencil that can be reused for all subsequent plantings.
the PCB and has the role of a reference indicator for the components on the PCB. Graphics and text on a circuit board's PCB are usually printed Assembly PCB with a non-conductive permanent epoxy ink. The color is usually white, although other colors are available: yellow, black, blue, red. Screen
through the board PCB Assembly and glued to the pads on the other side. "SMD" components are soldered on the same side of the board. A board can use both methods for soldering components. Today PCBs with components mounted only through holes are now less common. Surface mount is
basic printed circuit consists of a flat sheet of insulating material FR4, Rogers or Polyamide for flexible circuits, and a layer of copper foil, laminated to the substrate. Chemical etching divides the copper into separate conductive lines called PCB Assembly tracks or circuit paths, pads for connections, metallized holes (vias) for passing connections
